Iron Hot Dipped 3X3 Galvanized Welded Wire Mesh Panel

Welded wire mesh

Welded wire mesh is made with two orthogonal wires that are joined with each other at their intersections using a resistance welding approach to type a grid. The line wires of the grid are guided via the welder utilizing a sample board. The device drops cross wires into spot and fuses them with each other to create the two unique planes that sort welded wire mesh.

Line wires (also referred to as long wires) are laid out on a sample board to set the panel width spacing. Cross wires are fed into a hopper, and are programmed to be dropped one at a time onto the line wires. Then, the cross wires are resistance welded into place placing the panel length spacing. The panel advances following the weld and the method commences above once again.

Welded Wire Spacing
Welded wire mesh spacing can be expressed by measuring from the heart of two wires (Centre to Heart) or by measuring the opening between two wires (Clear Opening). We can manufacture common and personalized welded wire mesh with a sq. mesh spacing assortment from one” to as huge as may be necessary.  Rectangular mesh spacing ranges from one/2″ x up to as long as could be required.

Edge Problems
 Welded Wire Mesh has two regular edge problems: trimmed and untrimmed.

Element specification:
Substance: reduced carbon steel wire, galvanized wire ,stainless metal wire
Surface area dealing : black welded wire mesh,
electro galvanized before welded wire mesh,
Electro galvanized soon after welded wire mesh
very hot-dipped galvanized prior to welded wire mesh
Hot-dipped galvanized following welding wire mesh
PVC-coated welded wire mesh
Power coated welded wire mesh
Wire diameter: .45mm to twelve.0mm
Gap dimension: one/three” to one hundred fifty mm gap
Hole shape: square hole, rectangular hole
Width: .3M to 2.0M
Packing : in roll or in panel

please notice, we can weave speical wire diameter welded wire mesh such as one/4″X1.1mm, 1/two”X1.4mm and so on on your requirement 

Welded wire mesh Specification:
 

Open up in inch Opening in (mm) Wire diameter
1/4″ x 1/4″
 
6.4mm x six.4mm
 
22,23,24
 
three/8″ x 3/8″
 
ten.6mm x ten.6mm
 
19,twenty,21,22
 
one/2″ x one/2″
 
12.7mm x 12.7mm
 
16,17,18,19,20,21,22,23
 
5/8″ x five/eight”
 
16mm x 16mm
 
18,19,twenty,21,
 
3/four” x 3/four”
 
19.1mm x 19.1mm
 
sixteen,seventeen,18,19,20,21
 
one” x 1/two”
 
twenty five.4mm x 12.7mm
 
sixteen,17,18,19,twenty,21
 
one”X1″
 
25.4mmX25.4mm
 
15,sixteen,17,eighteen,19,20
 
one-1/2″ x one-1/two”
 
38mm x 38mm
 
fourteen,15,sixteen,seventeen,eighteen,19
 
one” x two”
 
25.4mm x 50.8mm
 
fourteen,fifteen,sixteen
 
two” x 2″
 
50.8mm x fifty.8mm
 
twelve,13,14,15,16
 
two” x 3″
 
50mm x 75mm
 
two.0mm,two.5mm,one.65mm
 
3″ x 3″
 
75mm x 75mm
 
two.67mm,2.41mm,two.11mm,1.83mm,1.65mm
 
two” x 4″
 
50mm x 100mm
 
2.11mm,2.5mm, 3.0mm, four.0mm
 
4″ x four”
 
100mm x 100mm
 
2.0mm,two.5mm, 3.0mm, four.0mm
 
CZPT Be aware:
1,CZPT roll size:20- 30mwidth: .5m to one.8m
two,Specific sizes CZPT at ask for
three,Packing: in waterproof paper in rolls. CZPT packing CZPT at ask for.
 

 

Iron Hot Dipped 3X3 Galvanized Welded Wire Mesh Panel