Product Description

CZPT rollers enhance rotation on the bushing while reducing impact loads on the sprocket tooth during operation.

All components are heat treated to achieve maximum strength. All components are heat treated to achieve maximum strength.

Pre-loaded during the manufacturing process to minimize initial elongation.

Hot dipped lubrication ensures 100% lubrication of all chain components to extend wear life and reduce maintenance costs.

ISO
NO.
ANSI
NO.
PITCH  ROLLER
LINK
WIDTH
ROLLER
DIA
PIN PLATE MIN. TENSILE
STRENGTH
AVG. TENSILE
STRENGTH
MAX. ALLOWABLE
LOAD
Pt
P W D d Lc L T H
mm mm mm mm mm mm mm mm kgf kgf kgf mm
08AH 40H 12.700 7.850 7.850 3.980 19.000 20.100 12.00 2.00 1,700 2,100 400 NIL
10AH 50H 15.875 9.400 9.400 5.090 21.800 23.700 15.00 2.40 2,670 3,300 670 NIL
12AH 60H 19.050 12.580 12.580 5.960 30.200 34.800 18.00 3.20 3,830 4,550 980 NIL
16AH 80H 25.400 15.750 15.750 7.940 37.400 42.800 24.10 4.00 8,000 9,400 1,700 NIL
20AH 100H 31.750 18.900 18.900 9.540 44.500 50.600 30.10 4.80 10,650 13,700 2,500 NIL
24AH 120H 38.100 25.230 25.230 11.110 55.000 61.600 36.20 5.60 15,320 19,000 3,350 NIL
28AH 140H 44.450 25.230 25.230 12.710 59.000 66.400 42.20 6.40 20,850 23,000 4,400 NIL
32AH 160H 50.800 31.550 31.550 14.290 69.400 77.300 48.20 7.10 27,240 31,000 5,750 NIL
36AH 180H 57.150 35.490 35.490 17.460 77.300 86.400 54.30 7.90 30,040 34,500 6,600 NIL
40AH 200H 63.500 37.850 37.850 19.850 87.100 97.300 60.30 9.50 42,550 59,000 7,750 NIL
48AH 240H 76.200 47.350 47.350 23.810 111.400 121.900 72.40 12.70 63,730 71,000 10,500 NIL
12AH-2 60H-2 19.050 12.580 12.580 5.960 56.300 60.900 18.00 3.20 7,660 9,300 1,650 26.11
16AH-2 80H-2 25.400 16.760 15.750 7.940 70.000 75.400 24.10 4.00 16,000 18,800 2,800 32.59
20AH-2 100H-2 31.750 18.900 18.900 9.540 83.600 89.700 30.10 4.80 21,300 27,400 4,250 39.09
24AH-2 120H-2 38.100 25.230 25.230 11.110 103.900 110.500 36.20 5.60 30,640 38,000 5,650 48.87
28AH-2 140H-2 44.450 25.230 25.230 12.710 111.200 118.600 42.20 6.40 41,700 45,000 7,400 52.20
32AH-2 160H-2 50.800 31.550 31.550 14.290 131.300 139.200 48.20 7.10 54,480 62,000 9,600 61.90
36AH-2 180H-2 57.150 35.490 35.490 14.760 146.500 155.600 54.30 7.90 60,080 69,000 11,000 69.16
40AH-2 200H-2 53.500 37.850 37.850 19.860 165.400 175.600 60.30 9.50 85,100 98,000 12,850 78.31
48AH-2 240H-2 76.200 47.350 47.350 23.810 212.600 223.100 72.40 12.70 127,460 142,000 17,700 101.22

Usage: Transmission Chain, Conveyor Chain, Heavy Type Short Pitch Roller Chain
Material: Alloy/Carbon Steel
Surface Treatment: Polishing
Feature: Heat Resistant
Chain Size: 1/2"*3"
Structure: Roller Chain
Samples:
US$ 10/Meter
1 Meter(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

chain

What is a drive chain?

A drive chain is a wheeled device that transmits power from one gear to another. The drive chain is usually an oval ring around a corner or worm gear. On the other hand, idler pulleys do not transmit power and are not used to move the chain. In some cases, drive chains can be used with idler pulleys to transport objects. This allows the drive chain to recover some power from the second gear.

conveyor chain

There are many types of conveyor chains to choose from. One type is a closed joint chain. It consists of the barrel and connecting rod, made from a single casting and heat-treated for high strength and durability. Conveyor chains typically have low running speeds and are typically made of malleable iron. Another type of chain is the power transmission chain, which is used to transmit mechanical power. They feature efficient lubrication and are stronger than conventional conveyor chains.
Roller chain pitches can range from half an inch to a third of an inch. They are available in steel and nickel-plated steel. They can be used with inline or staggered rollers and can be designed with different pitch levels. They can also have bushings between the chainplates or gaps between the teeth to increase their maximum spacing. When choosing a conveyor chain, remember to properly lubricate bearing surfaces to minimize power absorption, wear, and corrosion. Mineral oils of medium viscosity are suitable for normal operating temperatures. SAE 20W50 is suitable. Manufacturers also offer self-lubricating chains.
Conveyor chains are used in many industries. The automotive industry has traditionally used these chains for bulk transport. Their reliability and low cost make them an excellent choice for a variety of applications. CZPT Chains offers stainless steel and CZPT conveyor chains to meet your unique requirements. If you’re in the market for a new conveyor, don’t forget to shop around. CZPT Chain can help you find the perfect one.
The regular drive version consists of an ASME/ANSI roller chain wrapped around a driven sprocket. It can also be configured for variable rpm. The gear ratio between the two parts determines the reduction or increase in speed. In some cases, solution chains can be used. Roller chains are more efficient. Then, there are solutions for both cases. There are many types of conveyor chains to choose from.
Conveyor chain pitch also plays an important role in performance. The smaller the pitch of the chain, the faster it spins. On the other hand, a smaller pitch will require more teeth on the sprocket, which means more links will be engaged during the movement. This smaller articulation angle also produces smoother motion. It also reduces vibration. Therefore, CZPT Chains can be trusted for a long time.

roller chain

The performance of a drive chain depends on how well it is maintained and lubricated. Careful attention to detail is required when selecting a roller chain, which is one of the most important components in a drive chain. Its proper lubrication and assembly will significantly affect its wear life. Here are some important tips to follow when buying a roller chain:
The size of the drive chain should be selected according to the sprockets used. The large sprocket should have at least 25 teeth, and the small sprocket should have fewer teeth. The pitch of a drive chain is the contact angle between the chain and the sprocket. The smaller the sprocket, the smaller the contact angle of the two parts. Larger sprockets are better, but smaller sprockets must never have fewer teeth.
When purchasing a roller chain, be sure to consider the maximum speed of the small sprocket. This will determine how much lubrication you need. Different lubrication systems have different requirements. Manual lubrication limits how many feet per minute the drive chain can run, while oil bath lubrication can get you up to 1100 ft/min. The only way to maximize drive chain speed is to purchase a pump lubrication system.
Once you have the right length, you can determine if you need a new one. To do this you have to move the axis to measure the length. Once the length is determined, the drive chain should be removed from the sprocket and measured using the ANSI specified measuring load. You should also follow safety guidelines when measuring your chain. If you want to maximize the life of your drive chain, be sure to follow these tips.
Another important consideration is the type of environment you operate in. For applications that need to avoid rubbing steel rails, it is best to use a roller chain that can withstand a clean indoor environment. Although roller chains are generally more durable, they must be stored properly to avoid corrosion. If you care about the environment, consider opting for double chain. Its durability and low maintenance costs will make it a valuable investment in your business.

closed pivot

Closed-end pivot drive chains are used in a variety of applications. They are known for their durability, high strength, and long life. They are available in a variety of grades, including grade 400, grade 600, and grade 800 pivots, which can withstand the high forces required for certain applications. Enclosed pivot chains can be used to lift, pull, convey and transfer heavy loads.
Class 400 closed-end pivot chain features one-piece cast offset link construction. Steel pins connect each link and are prevented from rotating by head stops. This design allows the pin to connect inside the barrel without breaking. This type of chain is the most commonly used and has the highest durability. In addition to being extremely durable, it offers long-lasting performance and smooth operation.
Another closed-end pivot conveyor chain drive is called a power drive chain. These chains consist of barrels and links used to transmit rotation from one shaft to another. The barrels of the closed-end pivot chains are made of steel, which allows them to run easily on the sprockets. Block drive chains are used for low-speed applications, but they can be noisy when the chain is in contact with the sprockets.
The enclosed pivot drive chain has rollers on both ends to minimize wear. These chains are usually made of steel and can be used in areas where high-speed power transmission is required. They are also available in heavy-duty versions. Unlike other types of chains, steel pivot chains are designed for a variety of applications. They are suitable for heavy-duty applications and their open barrel design allows for minimal contact with the pins in the barrel and the root of the sprocket.
chain

Linear chain

CZPT is an important part of linear drive technology. This type of chain is capable of delivering real power in tight spaces. Typically, loads are moved by pulling or pushing. CZPT can perform both types of movements. They can push and pull additional loads. This type of chain can also be wound and stored in the magazine. It is a popular choice for small machine tools and many other uses.
Unlike traditional mechanical chains, CZPT uses a push-pull strategy to move heavy objects. It is a rigid locking design that prevents kinking and allows the chain to transmit force without bending. The CZPT is an excellent choice for moving large loads and is particularly versatile in power transmission. However, CZPT is more expensive than traditional drive chain options.
The service life of a linear chain depends on its design, material type and size. You may want to buy a good quality chain, but it’s not necessary in all cases. While superior quality can extend the life of the chain, it may not be necessary for low-speed drives or very light shock loads. If you’re not dealing with high-velocity shock loads, you probably don’t need features like oil reservoirs or bushing grooves.
The size of the drive sprocket can have a major impact on the overall life of the linear chain. It determines how fast the chain can go and how much horsepower it can produce. An 11-tooth chain will hit about half its rated speed, but only about 30 percent of its rated horsepower. You can extend the life of your linear chain by choosing a drive sprocket with a higher number of teeth. It is best to choose a drive sprocket with a high number of teeth, but make sure the number of teeth is even. This will ensure that your chain wear is evenly distributed.

China Standard Heavy Type Short Pitch Roller Chain Link Chain Conveyor Chain   CZPT bush chainChina Standard Heavy Type Short Pitch Roller Chain Link Chain Conveyor Chain   CZPT bush chain
editor by CX 2023-05-16